Description
HIGH TRAFFIC COMMERCIAL
BRUSHLESS DC SWING GATE OPERATOR
Low profile… Fast… High Performance…
Low profile gate operator measures an astonishing 15.5 inches to the top of the swing arm cap, making it the lowest profile gate operator on the market.
The Phantom PLUS can be hidden behind shrubs or landscaping to help architects keep the focus off the operators and on the gates. The Max Phantom 2000 PLUS operator is also compatible with existing installations and in most cases can be directly bolted onto concrete pads used by the most popular gate operators in the industry.
Max Phantom 2000 PLUS Mechanical Specifications
Specifications listed in blue are unique to Max Phantom 2000 PLUS
- Lowest profile design in the industry, ONLY 15.5” tall
-
Max Phantom 2000 PLUS dimensions (22”W x 18.75”D x 15.5”H)
-
Heavy duty gear box 900:1 Size 80 constant lubrication using special gear oil
-
Opens gates up to 2000lb/15ft or 1500lb/20ft
-
Large output shaft 3.25” solid steel with cast iron clamping system
-
Fast speed direct drive (no chains, belts, or pulleys) opens gate90 degrees from 11.5 to 20 seconds based on weight of the gate and selectable speed control
-
Mechanical and electrical manual gate release functions
-
Dual layer corrosion protection gold zinc and powder coating
-
Built-in loop rack
-
Gate operator shipping weight 216.5 lbs including operator, 1 control box, 1 swing arm and battery module
-
Continuous cycle at extreme temperature range. No overheating possibility
-
Intelligent ramp-up and ramp-down gate speed control for smooth operation
Max Phantom 2000 PLUS Electrical Specifications
Specifications listed in blue are unique to to Max Phantom 2000 PLUS
- Brushless DC motor equivalent to 1 HP AC motor
- Programmable gate speed controls, 16 selectable speeds
- Automatic gate position reset system
- Auto gate sync feature provides synchronous opening and closing between two gates
- Modular system design for ease of service
- Switchable 110/220 voltage selection
- Adaptive DSP control for advanced brushless DC motion control
- Real time performance analyzer and event log (OBD PORT and
Black Box)
-
Low voltage wiring capabilities for remote power up 500 feet (no battery needed)
-
Solar ready battery module with built-in advanced solar regulator
-
Intelligent power management system with energy saver mode
-
Built-in current limited 12vdc and 24vdc outputs
-
Gold contact input connections and automobile grade connectors
-
Selectable open timer 0 to 60 seconds with timer off option
-
-4F to 165F (-20C to +74C) operational temperature range including battery performance without needing a heater
-
Robust lightning protection up to 20KVolts and 10KAmps on all inputs and outputs (44 Channels) including loop detector input connections
-
Tunable 16 position safety obstruction sensor, adaptable to gate weight and size
-
Dual motor overcurrent safety shut off for additional protection
-
Every operator includes a Max BC-7 battery module with over 250 cycles in case of power failure
-
Three modes of selectable battery backup functions
-
State machine design electronics with ultra-fast microprocessor
-
On board three button station
Max Phantom 2000 PLUS Security Specifications
Specifications listed in blue are unique to Max Phantom 2000 PLUS
- High traffic intuitive loop management system for better security
- Advanced security features with built-in audible and remote alarms
- Magnetic lock control relay outputs with selectable delay times
- Tamper alert relay outputs triggered “on” if gate is forced open
- Audible alarm if gate is tampered with or ERD is triggered for higher security
- Gate partial open recorder
- Lockable cover with key lock release to prevent intruders and vandals
- Gate disable feature, disables all inputs with exception of the fire department input
- Built–in transaction buffer for high security
- Gate status outputs for gate monitoring
- Direct motor control of jog OPEN/CLOSE for manually moving a gate in case of emergency
- Advanced anti-tailgate features to provide higher security
- No need for magnetic lock with the robust output shaft and clamp design of the Max Phantom 2000 PLUS
Max Phantom 2000 PLUS Safety Specifications
Specifications listed in blue are unique to to Max Phantom 2000 PLUS
- Adaptive obstruction sensor for much better gate safety system. 16 selectable sensitivity settings
- Built-in UL buzzer reset
- UL 325/991 compliant Class I, II, III, and IV. CSA approved
- Pinch arm protection design
- Magnetic dynamic brake system stops the gate immediately to prevent damage to obstructions
- Vehicle hit protection technology protects the gate operator from collision damage caused by automobile impact
- Built-in advanced entrapment protection and alarm output
- Built-in gate in motion alarm for industrial applications
Reviews
There are no reviews yet.